Research Publications : 175 articles in SCI/Scopus journals, 26 articles in conference proceedings and eight book chapters.
Total Citations : 3470
‘h’ index : 34
RESEARCH PAPERS
Journal Publication- 175 papers in scopus indexed journals
1) Sahoo S.K.; Ramesh M.R.; Panigrahi S.K., Establishing high temperature tribological performance and wear mechanism map of engineered in-situ TiB2 reinforced Mg-RE metal matrix composites, 2025, Tribology International, 201, 10.1016/j.triboint.2024.110189
2) Aprameya C.R.; Joladarashi S.; Ramesh M.R., Dry linear reciprocating wear behavior of molybdenum-reinforced SS316 laser claddings deposited by laser directed energy deposition, 2025, Results in Surfaces and Interfaces, 18, 10.1016/j.rsurfi.2024.100407
3) Medabalimi S.; Hebbale A.M.; Gudala S.; Rokkala U.; Ramesh M.R., Studies on high temperature erosion behavior of HVOF-sprayed (Cr₃C₂-NiCr)Si and WC-Co/NiCrAlY composite coatings, 2025, International Journal of Refractory Metals and Hard Materials, 127, 10.1016/j.ijrmhm.2024.106970
4) Hebbale A.M.; Ramesh M.R.; Petru J.; Chandramouli T.V.; Srinath M.S.; Shetty R.K., A microstructural study and high-temperature oxidation behaviour of plasma sprayed NiCrAlY based composite coatings, 2025, Results in Engineering, 25, 10.1016/j.rineng.2025.103926
5) Ojha N.; Kumar S.; Ramesh M.R.; Balan A.S.S.; Doddamani M., A comprehensive characterization of 3D printable poly ether ketone ketone, 2024, Journal of the Mechanical Behavior of Biomedical Materials, 150, 10.1016/j.jmbbm.2023.106243
6) Kumar S.; Ojha N.; Ramesh M.R.; Doddamani M., 4D printing of heat-stimulated shape memory polymer composite for high-temperature smart structures/actuators applications, 2024, Polymer Composites, 45, 17, 15460-15490, 10.1002/pc.28844
7) Kumar P.; Ramesh M.R.; Doddamani M.; Narendranath S., Enhanced Anti-corrosion and Anti-fouling Properties of Galvanized Iron Using Nanocomposite Hydrophobic Coatings, 2024, Journal of Materials Engineering and Performance, 10.1007/s11665-024-10035-2
8) kumar P.; Ramesh M.R.; Doddamani M.; Suresh J., Plant (Costus Pictus D. Don) Assisted Green Synthesis of Double Oxide Nanoparticles for Antibacterial Applications, 2024, Chemistry Africa 7, 7, 3749-3762, 10.1007/s42250-024-00954-x
9) Kumar S.; Ojha N.; Ramesh M.R.; Balan A.S.S.; Doddamani M., Shape memory behavior of 4D printed CF/PEKK high temperature composite under subsequent thermomechanical cycles, 2024, Materials Letters, 366 , 10.1016/j.matlet.2024.136567
10) kumar P.; Ramesh M.R.; Doddamani M.; Suresh J.; Lingaraj R. Green synthesis of CuO/MgO/ZnO nanoparticles using Costus pictus leaf extract for effective antibacterial applications, 2024, Materials Letters, 359, 10.1016/j.matlet.2024.135918
11) Behera N.; Ramesh M.R.; Rahman M.R., Elevated temperature wear and friction performance of WC-CoCr/Mo and WC-Co/NiCr/Mo coated Ti-6Al-4V alloy, 2024, Materials Characterization, 215, 10.1016/j.matchar.2024.114207
12) Medabalimi S.; Hebbale A.M.; Singh R.; Desai V.; Ramesh M.R., Microstructural evolution and cyclic oxidation behavior of HVOF-sprayed NiCrSi and NiCrC coatings on T11 steel, 2024, Materials Characterization, 218, 10.1016/j.matchar.2024.114495
13) Chandramouli T.V.; Joladarashi S.; Ramesh M.R.; Rahman M.R., Microstructure, Mechanical Properties, and Tribological Properties of Fe-Based Composite Coatings Reinforced with WC-Co and Cr3C2, 2024, Journal of Materials Engineering and Performance, 10.1007/s11665-024-09762-3
14) Poornima H.G.; Bindushree S.N.; Raksha A.; Lateshkumar S.N.; Rajanna S.; Ramesh M., Simulation Based Hybrid Solar and Wind Energy System for Standalone Application, 2024 IEEE Students Conference on Engineering and Systems: Interdisciplinary Technologies for Sustainable Future, SCES 2024, 10.1109/SCES61914.2024.10652580
15) Ramesh M.R.; Medabalimi S.; Kumar R.S.; Prasad C.D.; Sollapur S.B., Cyclic Oxidation and Hot-Corrosion Behavior of HVOF-Sprayed NiCrAl Coating on Industrial Boiler Tube Steels, 2024, JOM, 76, 6, 3172- 3184, 10.1007/s11837-024-06526-1
16) Kumar S.; Rajath S.; Shivakumar N.D.; Ramesh M.R.; Doddamani M., 3D printing of functionally graded nanocomposites: An investigation of microstructural, rheological, and mechanical behavior, 2024, Polymer Engineering and Science, 64, 10, 4677-4694 , 10.1002/pen.26873
17) H S.; M R.; Prasad C.D.; Ramesh M.R.; M P.; Vasudev H.; Kumar S., Microstructure, mechanical and wear properties of SiC and Mo reinforced NiCr microwave cladding, 2024, Advances in Materials and Processing Technologies, 10, 4, 3620-3633, 10.1080/2374068X.2023.2257937
18) Behera N.; Srihari M.; Sharma Y.K.; Ramesh M.R., An investigation on tribological performance in HVOF sprayed of Amdry1371 and Amdry 1371/WC-Co coatings on Ti6Al4V, 2024, Surface and Coatings Technology, 494, 10.1016/j.surfcoat.2024.131334
19) Kumar P.; Ramesh M.R.; Doddamani M., Fabrication and Characterization of Silicon Dioxide-Reinforced Polydimethylsiloxane Composite Coating for Corrosion Protection of Galvanized Iron, 2024, SAE International Journal of Materials and Manufacturing, 17, 4, 10.4271/05-17-04-0022
20) Rokkala U.; Suresh G.; Ramesh M.R., Comparative Study of Plasma Spray and Friction Stir Processing on Wear Properties of Mg-Zn-Dy Alloy, 2024, Journal of Materials Engineering and Performance, 33, 4, 1578-1587, 10.1007/s11665-023-08087-x
21) Chandramouli T.V.; Joladarashi S.; Ramesh M.R.; Rahman M.R., Effect of temperature on wear and friction performance of WC-Co and Cr3C2 reinforced with 17-4PH Fe-based composite coatings, 2024, Welding in the World, 68, 1, 91-105,10.1007/s40194-023-01628-x
22) Rokkala U.; Bontha S.; Ramesh M.R.; Balla V.K., Multi-step fabrication of bioactive Mg–Zn–Dy–AlO3/HA composites: exploring the synergistic effects of plasma spray and friction stir processing, 2024, Journal of Materials Science, 59, 24, 10998-11014, 10.1007/s10853-024-09830-y
23) Behera N.; Chandramouli T.V.; Aprameya C.R.; Ramesh M.R., Influence of Impact Angle and Temperature on Solid Particle Erosion Behavior of Titanium-31, 2024, Advances in Science, Technology and Innovation, 2024, 277-283, 10.1007/978-3-031-63909-8_38
24) Addepalli S.N.; Joladarashi S.; Ramesh M.R., Elevated temperature tribological performance of non-equiatomic CoCrNiTiWx high entropy alloy coatings developed by mechanical alloying and high-velocity oxy-fuel spray,2024, Surface and Coatings Technology, 476, 10.1016/j.surfcoat.2023.130267
25) Kumar P.; Ramesh M.R.; Doddamani M.; Suresh J., Green synthesis of fe/ni/cr oxide nanoparticles using costus pictus plant extract: Microstructure and biological properties, 2024, Surface Review and Letters 31, 8, 10.1142/S0218625X24500653
26) Sharanabasava H.; Prasad C.D.; Ramesh M.R., Characterization and Wear Behavior of NiCrMoSiC Microwave Cladding, 2024, Journal of Materials Engineering and Performance, 33, 2, 763-775, 10.1007/s11665-023-07998-z
27) kumar P.; Ramesh M.R.; Doddamani M.; Bhosale S. Investigation of antibacterial potential of CuO nanoparticles synthesised using Costus pictus leaf extract, 2024, Inorganic Chemistry Communications, 169, 10.1016/j.inoche.2024.113074
28) Kumar P.; Anne G.; Ramesh M.R.; Doddamani M.; Prabhu A., Enhancing the functionality of biodegradable Mg–Zn–Mn alloys using poly(lactic) acid (PLA) coating for temporary implants, 2024, Journal of Coatings Technology and Research, 21, 4 , 1525-1537, 10.1007/s11998-024-00913-8
29) Sangeetha A.; Hariganesh S.; Abarna B.; Kumar P.; Ramesh M.R.; Doddamani M. ,Onion Peels Assisted Synthesis of Biofunctionalized CuO Nanoparticles as Nano-Photocatalyst and Nano-Antibiotic, 2024, Chemistry Africa, 7, 9, 4861- 4873, 10.1007/s42250-024-01066-2
30) Kumar S.; Ramesh M.R.; Jeyaraj P.; Powar S.; Doddamani M., Buckling behavior of non-uniformly heated 3D printed plain and functionally graded nanocomposites, 2023, Polymer Composites, 44, 9, 5450-5463, 10.1002/pc.27500
31) Behera N.; Medabalimi S.; Ramesh M.R., Effect of Impact Angles and Temperatures on the Solid Particle Erosion Behavior of HVOF Sprayed WC-Co/NiCr/Mo and Cr3C2-CoNiCrAlY Coatings, 2023, Journal of Thermal Spray Technology 32, 8, 2411-2425, 10.1007/s11666-023-01654-7
32) Behera N.; Medabalimi S.R.; Ramesh M.R., Elevated temperatures erosion wear behavior of HVOF sprayed WC-Co-Cr/Mo coatings on Ti6Al4V substrate, 2023, Surface and Coatings Technology, 470, 10.1016/j.surfcoat.2023.129809
33) Reddy G.M.S.; Prasad C.D.; Patil P.; Shetty G.; Kakur N.; Ramesh M.R., High temperature erosion performance of NiCrAlY/Cr2O3/YSZ plasma spray coatings, 2023 , Transactions of the Institute of Metal Finishing, 101, 5, 245-251, 10.1080/00202967.2023.2208899
34) Suresh G.; Ramesh M.R.; Srinath M.S., Surface Engineered Titanium Alloys for Biomedical, Automotive, and Aerospace Applications, 2023, Materials Horizons: From Nature to Nanomaterials, 89, 102, 10.1007/978-981-19-7146-4_5
35) Kumar S.; Ramesh M.R.; Doddamani M., Investigation on hardness, impact, and compression responses of additively manufactured functionally graded nanocomposites, 2023, Composites Communications, 39, 10.1016/j.coco.2023.101545
36) Ojha N.; Kumar S.; Ramesh M.R.; Balan A.S.S.; Doddamani M., Influence of subsequent thermomechanical cycles on shape memory behavior of 4D printed PEKK, 2023, Materials Letters, 352, 10.1016/j.matlet.2023.135213
37) Kumar S.; Jegadeeswaran N.; Ramesh M.R.; Sangamnath K.R.; Mownesh G.K., Design and Analysis of Automotive Mufflers for Noise Attenuation in Low and Broadband Frequency Range, 2023, Journal of Mines, Metals and Fuels, 71, 12, 2585-2592, 10.18311/jmmf/2023/36539
38) Medabalimi S.R.; Ananthu M.R.; Gudala S.; Ramesh M.R. Effect of Microwave Hybrid Heating on High-Temperature Adhesive Wear Behavior of High-Velocity Oxygen Fuel-Sprayed WC-CrC-Ni and WC-Co/NiCrFeSiB Coatings, 2023, Journal of Materials Engineering and Performance, 32, 19, 8612- 8624, 10.1007/s11665-022-07756-7
39) Mathapati M.; Ramesh M.R.; Doddamani M., Lightweight and sustainable materials for coating applications, 2023, Lightweight and Sustainable Composite Materials: Preparation, Properties and Applications, 241-258 , 10.1016/B978-0-323-95189-0.00011-1
40) Addepalli S.N.; Joladarashi S.; Ramesh M.R., Phase evolution and high-temperature wear behavior of non-equiatomic metastable CoCrNiTiMox HEA coatings fabricated by high-velocity oxy-fuel technique, 2023, Materials Today Communications, 35, 10.1016/j.mtcomm.2023.106310
41) Sharanabasava H.; Prasad C.D.; Ramesh M.R., Effect of Mo- and SiC-Reinforced NiCr Microwave Cladding on Microstructure, Mechanical and Wear Properties, 2023, Journal of The Institution of Engineers (India): Series D, 104,2,539-551, 10.1007/s40033-022-00445-8
42) Reddy G.M.S.; Prasad C.D.; Patil P.; Shetty G.K.; Kakur N.; Ramesh M.R., Investigation of the effect of NiCrAlY/Cr2O3/YSZ plasma coatings on erosion performance of MDN 420 steel at high temperature, 2023, International Journal of Surface Science and Engineering, 17, 3, 180-194, 10.1504/IJSURFSE.2023.134785
43) Vijeesh V.P.; Ramesh M.R.; Anoop A.D., Inconel 625 Coatings on AISI 304 Steel using Laser Cladding: Microstructure and Hardness, 2023, Engineering, Technology and Applied Science Research, 13, 5, 11911-11916, 10.48084/etasr.6297
44) Rokkala U.; Bontha S.; Ramesh M.R.; Balla V.K., Influence of friction stir processing on microstructure, mechanical properties and corrosion behaviour of Mg-Zn-Dy alloy, 2023, Journal of Materials Science, 58, 6, 2893-2914, 10.1007/s10853-023-08208-w
45) Kumar S.; Ramesh M.R.; Jeyaraj P.; Doddamani M., Buckling and dynamic responses of 3D printed nanocomposites and their graded variants,2023,Composite Structures, 316, 10.1016/j.compstruct.2023.117031
46) Shejwal S.; Ramesh M.R., Temperature and Thermal Stress Analysis of TBC Coated Diesel Engine Piston for Variable Thickness of TBC, 2023, Lecture Notes in Mechanical Engineering, 557-566, 10.1007/978-981-19-9285-8_53
47) Ramesh M.; Kharbanda D.K.; Kumar S.; Kumar D.; Khanna P.K.; Suri N., Potentiometric Testing of Soil by Printed Nobel Metal Thick Film Electrode, 2023, Journal of the Electrochemical Society, 170, 1, 10.1149/1945-7111/acb5c8
48) Kumar S.; Ramesh M.R.; Doddamani M., Recycling potential of MWCNTs/HDPE nanocomposite filament: 3D printing and mechanical characterization, 2023, Journal of Material Cycles and Waste Management, 25, 2, 1168-1178, 10.1007/s10163-023-01607-w
49) Suresh G.; Ramesh M.R.; Srinath M.S., Development of Self-lubricating Nickel Based Composite Clad using Microwave Heating in Improving Resistance to Wear at Elevated Temperatures, 2022, Metals and Materials International, 28, 8, 2000-2011, 10.1007/s12540-021-01078-4
50) Kumar S.; Ramesh M.R.; Doddamani M., Compressive behavior of 3D printed MWCNT/HDPE nanocomposites, 2022 , Composites Communications, 35, 10.1016/j.coco.2022.101317
51) Madhu Sudana Reddy G.; Prasad C.D.; Patil P.; Shetty G.; Ramesh M.R.; Nageswara Rao T., Investigation of thermally sprayed NiCrAlY/TiO2and NiCrAlY/Cr2O3/YSZ cermet composite coatings on titanium alloys, 2022, Engineering Research Express, 4, 2, 10.1088/2631-8695/ac7946
52) Gudala S.; Ramesh M.R.; Shanmugam N.S., Influence of Solid Lubricants on Microstructure and Tribological Performance of Nickel-Based Composite Coatings, 2022, Metallography, Microstructure, and Analysis, 11, 2, 281-292, 10.1007/s13632-022-00837-y
53) Gudala S.; Ramesh M.R.; Srinath M.S., Microstructure and Wear Behavior of Self-Lubricating Microwave Clads Deposited on Titanium Alloy, 2022, Journal of Materials Engineering and Performance, 31, 11, 8864-8877, 10.1007/s11665-022-06926-x
54) Addepalli S.N.; Joladarashi S.; Ramesh M.R.; Arya S.B., Effect of Mechanical Alloying on the Microstructure of CoCrNiTiMo x High Entropy Alloy, 2022, Journal of Thermal Spray Technology, 31, 4, 1045-1055, 10.1007/s11666-021-01317-5
55) Reddy G.M.S.; Ramesh S.; Anne G.; Ramesh M.R.; Rao T.N.; Patil P., Solid Particle Erosion Behaviour of Plasma-Sprayed (WC–Co)/(Cr3C2–NiCr) Coatings, 2022, Journal of Bio- and Tribo-Corrosion, 8, 2, 10.1007/s40735-022-00629-5
56) Reddy G M.S.; Prasad C.D.; Patil P.; Kakur N.; Ramesh M.R., Elevated temperature erosion performance of plasma sprayed NiCrAlY/TiO2coating on MDN 420 steel substrate, 2022, Surface Topography: Metrology and Properties, 10, 2, 10.1088/2051-672X/ac6a6e
57) Pooja B.; Rajanna S.; Varaprasad N.L.; Ramesh M.; Sowmya G.R.; Rakshitha S.R., Design of a Battery Charge Controller Through MPPT Based Solar Photovoltaic System, 2022 , 4th International Conference on Emerging Research in Electronics, Computer Science and Technology, ICERECT, 2022, 10.1109/ICERECT56837.2022.10060581
58) Suresh G.; Ramesh M.R.; Shanmugam N.S.; Srinath M.S., MICROSTRUCTURE AND TRIBOLOGICAL PERFORMANCE OF SELF-LUBRICATE CLADDING PRODUCED BY TUNGSTEN INERT GAS AND MICROWAVE HYBRID HEATING TECHNIQUES, 2022, Surface Review and Letters, 29 ,9, 10.1142/S0218625X22501256
59) Hanumanthlal S.; Siddaraju C.; Ramesh M.R.; Thirtha Prasada H.P.; Somasundaram B., Hot corrosion behavior of plasma sprayed FeCrNiC and FeCrNiC/Cenosphere coatings on ASTM-SA213-T22 steel, 2022, Materials Today: Proceedings ,59, 58, 65, 10.1016/j.matpr.2021.10.201
60) Ravikumar K.S.; Ghanaraja S.; Ramesh M.R., Effect of Milling on the Hardness and Wear Behaviour of Cast Al6061 Reinforced with Al2O3 Nanoparticles, 2022, Journal of Bio- and Tribo-Corrosion, 8, 1, 10.1007/s40735-021-00598-1
61) Naik T.; Mathapati M.; Prasad C.D.; Nithin H.S.; Ramesh M.R., EFFECT of LASER POST-TREATMENT on MICROSTRUCTURAL and SLIDING WEAR BEHAVIOR of HVOF-SPRAYED NiCrC and NiCrSiCOATINGS,2022,Surface Review and Letters,29,1, 10.1142/S0218625X2250007X
62) V Badiger P.; Mahesh V.; Desai V.; Ramesh M.R.; Gourkar H., Wear behaviour of AlCN/AlC and FeCrN coatings developed on alloy steel, 2022, Advances in Materials and Processing Technologies, 9, 4, 1903-1919, 10.1080/2374068X.2022.2136668
63) Kumar S.; Ramesh M.R.; Doddamani M.; Rangappa S.M.; Siengchin S., Mechanical characterization of 3D printed MWCNTs/HDPE nanocomposites, 2022, Polymer Testing,114, 10.1016/j.polymertesting.2022.107703
64) Reddy G.M.S.; Prasad C.D.; Shetty G.; Ramesh M.R.; Rao T.N.; Patil P., High-temperature oxidation behavior of plasma-sprayed NiCrAlY/TiO2 and NiCrAlY/Cr2O3/YSZ coatings on titanium alloy, 2022, Welding in the World, 66, 6, 1069-1079, 10.1007/s40194-022-01268-7
65) Patil V.G.; Somasundaram B.; Kandaiah S.; Ramesh M.R.; Kumar S., High Temperature Corrosion Behavior of High Velocity Oxy Fuel Sprayed NiCrMoFeCoAl-30%SiO2 and NiCrMoFeCoAl-30%Cr2O3 Composite Coatings on ASTM SA213-T22 Steel in a Coal-fired Boiler Environment, 2022, International Journal of Engineering, Transactions A: Basics, 35,7,1416-1427, 10.5829/ije.2022.35.07a.19
66) Somasundaram B.; Patil V.G.; Ramesh M.R.; Kandaiah S.; Jegadeeswaran N.,Microstructure characteristics and properties of WC-CrC-Ni HVOF coating for boiler tube steel, 2022, Materials Today: Proceedings 54, 366-371, 10.1016/j.matpr.2021.09.310
67) Medabalimi S.R.; Ramesh M.R.; Kadoli R. Developing partially oxidized NiCr coatings using the combined flame spray and plasma spray process for improved wear behaviour at high temperature, 2021, Wear, 478-479, 10.1016/j.wear.2021.203885
68) Medabalimi S.R.; Ramesh M.R.; Kadoli R. High-Temperature Solid Particle Erosion Behavior of Partially Oxidized NiCrBSiFe/NiCr Plasma Spray Coatings 2021 Journal of Thermal Spray Technology, 30, 6, 1638-1652, 10.1007/s11666-021-01225-8
69) Ravikumar K.S.; Ghanaraja S.; Ramesh M.R., Synthesis and characterization of nano-alumina powder by milling of Al and MnO2powder mixture, 2021, Materials Today: Proceedings, 46, 9021-9026, 10.1016/j.matpr.2021.05.381
70) Hanumanthlal S.; Siddaraju C.; Ramesh M.R., High-Temperature Solid-Particle Erosion Behaviour of Plasma-Sprayed Fe17Cr2Ni0.18C/Cenosphere-Based Composite Coating, 2021, Journal of Bio- and Tribo-Corrosion, 7, 2, 10.1007/s40735-021-00503-w
71) Reddy M.; Prasad C.D.; Patil P.; Ramesh M.R.; Rao N., Hot corrosion behavior of plasma-sprayed NiCrAlY/TiO2 and NiCrAlY/Cr2O3/YSZ cermets coatings on alloy steel, 2021, Surfaces and Interfaces, 22, 10.1016/j.surfin.2020.100810
72) Durga Prasad C.; Shashank Lingappa M.; Joladarashi S.; Ramesh M.R.; Sachin B., Characterization and sliding wear behavior of CoMoCrSi+Flyash composite cladding processed by microwave irradiation, 2021, Materials Today: Proceedings, 46, 2387-2391, 10.1016/j.matpr.2021.01.156
73) Hanumanthlal S.; Siddaraju C.; Ramesh M.R.; Thirtha Prasada H.P.; Somasunder B.; Virupakshappa L., Microstructural Characterization and Hot Corrosion Behavior of Plasma-Sprayed Fe17Cr2Ni0.18C/Fly Ash Cenosphere-Based Composite Coating, 2021, SAE International Journal of Materials and Manufacturing, 14, 3, 259-274, 10.4271/05-14-03-0017
74) Rokkala U.; Jana A.; Bontha S.; Ramesh M.R.; Balla V.K., Comparative investigation of coating and friction stir processing on Mg-Zn-Dy alloy for improving antibacterial, bioactive and corrosion behaviour, 2021, Surface and Coatings Technology, 425, 10.1016/j.surfcoat.2021.127708
75) Rokkala U.; Bontha S.; Ramesh M.R.; Balla V.K.; Srinivasan A.; Kailas S.V., Tailoring surface characteristics of bioabsorbable Mg-Zn-Dy alloy using friction stir processing for improved wettability and degradation behavior, 2021, Journal of Materials Research and Technology, 12, 1530-1542, 10.1016/j.jmrt.2021.03.057
76) Ravikumar K.S.; Ghanaraja S.; Ramesh M.R., Effect of Ball Milling on the Tensile Properties of Aluminum-Based Metal Matrix Nanocomposite Developed by Stir Casting Technique, 2021, SAE International Journal of Materials and Manufacturing, 14, 4, 10.4271/05-14-04-0030
77) Gudala S.; Ramesh M.R.; Nallathambi S.S., Evolution of Microstructure and High-Temperature Tribological Performance of Self-Lubricating Nickel-Based Composite Tungsten Inert Gas Coatings, 2021, Journal of Materials Engineering and Performance, 30, 11, 8080-8094, 10.1007/s11665-021-06008-4
78) Madhu Sudana Reddy G.; Durga Prasad C.; Shetty G.; Ramesh M.R.; Rao T.N.; Patil P., High-Temperature Oxidation Studies of Plasma-Sprayed NiCrAlY/TiO2 and NiCrAlY/Cr2O3/YSZ Cermet Composite Coatings on MDN-420 Special Steel Alloy, 2021, Metallography, Microstructure, and Analysis, 10, 5, 642-651, 10.1007/s13632-021-00784-0
79) Kanakannavar S.; Pitchaimani J.; Ramesh M.R., Tribological behaviour of natural fibre 3D braided woven fabric reinforced PLA composites, 2021, Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 235, 7, 1353-1364, 10.1177/1350650120954949
80) Subba Rao M.; Ramesh M.R.; Ravikiran K., Solid Particle Erosion Behavior of Partially Oxidized Al with NiCr Composite Coating at Elevated Temperature, 2021, Journal of Materials Engineering and Performance, 30, 5, 3749-3760, 10.1007/s11665-021-05668-6
81) Duraisamy R.; Kumar S.M.; Kannan A.R.; Shanmugam N.S.; Sankaranarayanasamy K.; Ramesh M.R., Tribological performance of wire arc additive manufactured 347 austenitic stainless steel under unlubricated conditions at elevated temperatures, 2020, Journal of Manufacturing Processes, 56, 306-321, 10.1016/j.jmapro.2020.04.073
82) Soni H.; Narendranath S.; Ramesh M.R.; Mashinini P.M., Enhanced process parameters using TOPSIS method during wire electro discharge machining of TiNiCo shape memory alloy, 2020, AIP Conference Proceedings, 2204, 10.1063/1.5141578
83) Shankar V.K.; Kunar B.M.; Murthy C.S.; Ramesh M.R., Measurement of bit-rock interface temperature and wear rate of the tungsten carbide drill bit during rotary drilling, 2020, Friction, 8, 6, 1073-1082, 10.1007/s40544-019-0330-2
84) Nagabhushana N.; Rajanna S.; Ramesh M.R.; Pushpa N., Influence of temperature on friction and wear behavior of aps sprayed nicrbsi/flyash and nicrbsi/flyash/tio2 coatings, 2020, Journal of Green Engineering, 10, 11, 11620-11643
85) Patil A.; Bontha S.; Ramesh M.R., Effect of ECAP on sliding wear behaviour of Mg-Zn-Gd-Zr alloy, 2020, Materials Today: Proceedings, 20, 97, 102, 10.1016/j.matpr.2019.10.045
86) Prasad C.D.; Joladarashi S.; Ramesh M.R., Comparative investigation of HVOF and flame sprayed CoMoCrSi coating, 2020, AIP Conference Proceedings, 2247, 10.1063/5.0003883
87) Prasad C.D.; Jerri A.; Ramesh M.R., Characterization and Sliding Wear Behavior of Iron-Based Metallic Coating Deposited by HVOF Process on Low-Carbon Steel Substrate, 2020, Journal of Bio- and Tribo-Corrosion, 6, 3, 10.1007/s40735-020-00366-7
88) Badiger P.V.; Desai V.; Ramesh M.R.; Vinyas M.; Santhosh C.M.; Prajwala B.K.; Raveendra L., Influence of Ti coated tools on process parameters in turning process of MDN431, 2020, AIP Conference Proceedings, 2204, 10.1063/1.5141592
89) Prasad C.D.; Joladarashi S.; Ramesh M.R.; Srinath M.S.; Channabasappa B.H., Comparison of Microstructural and Sliding Wear Resistance of HVOF Coated and Microwave Treated CoMoCrSi-WC + CrC + Ni and CoMoCrSi-WC + 12Co Composite Coatings Deposited on Titanium Substrate, 2020, Silicon, 12, 12, 3027-3045, 10.1007/s12633-020-00398-1
90) Prasad C.D.; Joladarashi S.; Ramesh M.R.; Srinath M.S., Microstructural and Tribological Resistance of Flame-Sprayed CoMoCrSi/WC-CrC-Ni and CoMoCrSi/WC-12Co Composite Coatings Remelted by Microwave Energy, 2020, Journal of Bio- and Tribo-Corrosion, 6, 4, 10.1007/s40735-020-00421-3
91) Babu N.R.; Ramesh M.R.; Murthy R.N.; Reddy J.S.; Aithal S.K.; Manjunath H.N., Study of tribological characteristics of Al-Si based directional solidified FGM with graphite end chill, 2020, AIP Conference Proceedings, 2274, 10.1063/5.0022478
92) Gonsalves T.H.; Kumar G.C.M.; Ramesh M.R., Model updating of material damping in composite material of rotor-bearing support system, 2020, AIP Conference Proceedings, 2247, 10.1063/5.0003873
93) Varghese V.; Jagmalpuria A.; Badiger P.V.; Ramesh M., Optimisation of machining parameters for end milling of maraging steel MDN 250 using TiAlSiN and TiSiN coated WC-Co inserts, 2020, AIP Conference Proceedings, 2204, 10.1063/1.5141604
94) Nagabhushana N.; Rajanna S.; Ramesh M.R., Erosion studies of Plasma-Sprayed NiCrBSi, Mo and Flyash Cenosphere coating, 2020, IOP Conference Series: Materials Science and Engineering, 925, 1, 10.1088/1757-899X/925/1/012009
95) Varghese V.; Ramesh M.R.; Chakradhar D., Experimental investigation of cryogenic end milling on maraging steel using cryogenically treated tungsten carbide-cobalt inserts, 2019, International Journal of Advanced Manufacturing Technology, 105, 05-Jun, 2001, 2019, 10.1007/s00170-019-04387-6
96) Ramesh S.; Anne G.; Nayaka H.S.; Sahu S.; Ramesh M.R. Investigation of dry sliding wear properties of multi-directional forged Mg–Zn alloys 2019 Journal of Magnesium and Alloys, 7, 3, 444-455, 10.1016/j.jma.2019.05.008
97) Badiger P.V.; Desai V.; Ramesh M.R.; Prajwala B.K.; Raveendra K., Cutting Forces, Surface Roughness and Tool Wear Quality Assessment Using ANN and PSO Approach During Machining of MDN431 with TiN/AlN-Coated Cutting Tool, 2019, Arabian Journal for Science and Engineering, 44, 9, 7465-7477, 10.1007/s13369-019-03783-0
98) Kulkarni P.S.; Sharanappa G.; Ramesh M.R.; Banapurmath N.R.; Khandal S.V., Experimental investigations of a low heat rejection (LHR) engine powered with Mahua oil methyl ester (MOME) with exhaust gas recirculation (EGR), 2019, Biofuels,10,6,747-756, 10.1080/17597269.2017.1345356
99) Prasad C.D.; Joladarashi S.; Ramesh M.R.; Srinath M.S.; Channabasappa B.H., Development and Sliding Wear Behavior of Co-Mo-Cr-Si Cladding through Microwave Heating, 2019, Silicon, 11, 6, 2975-2986, 10.1007/s12633-019-0084-5
100) Prasad C.D.; Joladarashi S.; Ramesh M.R.; Srinath M.S.; Channabasappa B.H., Effect of microwave heating on microstructure and elevated temperature adhesive wear behavior of HVOF deposited CoMoCrSi-Cr3C2coating,2019,Surface and Coatings Technology,374,291,304, 10.1016/j.surfcoat.2019.05.056
101) Varghese V.; K. A.; Ramesh M.R.; Chakradhar D., Investigation on the performance of AlCrN and AlTiN coated cemented carbide inserts during end milling of maraging steel under dry, wet and cryogenic environments,2019,Journal of Manufacturing Processes,43,136,144, 10.1016/j.jmapro.2019.05.021
102) Hargovind S.; Ramesh M.R.; Narendranath S., Advanced machining of TiNiCo shape memory alloys for biomedical applications, 2019, Emerging Materials Research, 8 1,14,21, 10.1680/jemmr.17.00066
103) Reddy N.C.; Koppad P.G.; Reddappa H.N.; Ramesh M.R.; Babu E.R.; Varol T., Hot corrosion behaviour of HVOF sprayed Ni3Ti and Ni3Ti + (Cr3C2 + 20NiCr) coatings in presence of Na2SO4-40%V2O5 at 650 °c, 2019, Surface Topography: Metrology and Properties, 7, 2, 10.1088/2051-672X/ab23d2
104) Nagabhushana N.; Rajanna S.; Mathapati M.; Ramesh M.R.; Koppad P.G.; Reddy N.C., Microstructure and tribological characteristics of APS sprayed NiCrBSi/flyash cenosphere/Cr2O3 and NiCrBSi/flyash cenosphere/Mo composite coatings at elevated temperatures, 2019, Materials Research Express, 6, 8, 10.1088/2053-1591/ab24f1
105) Anne G.; Ramesh S.; Kumar G.; Sahu S.; Ramesh M.R.; Shivananda Nayaka H.; Arya S., Development, Characterization, Mechanical and Corrosion Behaviour Investigation of Multi-direction Forged Mg–Zn Alloy, 2019, Minerals, Metals and Materials Series, 339-343, 10.1007/978-3-030-05789-3_50
106) Soni H.; Narendranath S.; Ramesh M.R., Effects of Wire Electro-Discharge Machining Process Parameters on the Machined Surface of Ti50Ni49Co,1Shape Memory Alloy, 2019, Silicon, 11, 2, 733-739, 10.1007/s12633-017-9687-x
107) Narayanappa R.B.; Rangarasaiah R.M.; Subbanna K.A.; Shivakumar V.K.; Shetty M.H.N., Study of dry sliding wear behavior of Al-Si-C FG alloy developed through directional solidification, 2019, AIP Conference Proceedings, 2080, 10.1063/1.5092892
108) Gonsalves T.H.; Kumar G.C.M.; Ramesh M.R., Leveraging the effectiveness of hybrid metal-fiber composites in high speed rotating machines, 2019, AIP, Conference Proceedings, 2057, 10.1063/1.5085580
109) Ramesh S.; Anne G.; Nayaka H.S.; Sahu S.; Ramesh M.R., Influence of Multidirectional Forging on Microstructural, Mechanical, and Corrosion Behavior of Mg-Zn Alloy, 2019, Journal of Materials Engineering and Performance,28, 4, 2053-2062, 10.1007/s11665-019-04007-0
110) Chinnathaypgal V.N.; Rangarasaiah R.M.; Desai V.; Samanta S.K., Evaluation of Wear Behaviour of Metal Injection Moulded Nickel Based Metal Matrix Composite, 2019, Silicon, 11, 1, 175-185, 10.1007/s12633-018-9843-y
111) Veeresh Nayak C.; Ramesh M.R.; Desai V.; Samanta S.K., Sintering metal injection molding parts of tungsten-based steel using microwave and conventional heating methods, 2019, Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 233, 11, 2138-2146, 10.1177/0954405418816853

112) Varghese V.; Ramesh M.R.; Chakradhar D.; Shaik H., Characterisation and performance evaluation of TiSiN &tiAlSiN coatings by RF magnetron sputtering deposition during end milling of maraging steel, 2019, Materials Research Express,6,12, 10.1088/2053-1591/ab5e74
113) Badiger P.V.; Desai V.; Ramesh M.R.; Joladarashi S.; Gourkar H.,Tribological behaviour of monolayer and multilayer Ti-based thin solid films deposited on alloy steel, 2019, Materials Research Express, 6, 2, 10.1088/2053-1591/aaef6d
114) Gonsalves T.H.; Mohan Kumar G.C.; Ramesh M.R., Dynamic study of composite material shaft in high-speed rotor-bearing systems, 2019, International Journal of Vehicle Noise and Vibration 15, 02-Mar, 89, 109, 10.1504/IJVNV.2019.106371
115) Badiger P.V.; Desai V.; Ramesh M.R.; Prajwala B.K.; Raveendra K., Effect of cutting parameters on tool wear, cutting force and surface roughness in machining of MDN431 alloy using Al and Fe coated tools, 2019, Materials Research Express, 6, 1, 10.1088/2053-1591/aae2a3
116) Padmini B.V.; Mathapati M.; Niranjan H.B.; Sampathkumaran P.; Seetharamu S.; Ramesh M.R.; Mohan N., High temperature tribological studies of cold sprayed nickel based alloy on low carbon steels, 2019, Materials Today: Proceedings, 27, 1951, 1958, 10.1016/j.matpr.2019.09.025
117) Prasad C.D.; Joladarashi S.; Ramesh M.R.; Srinath M.S.; Channabasappa B.H.,Microstructure and tribological behavior of flame sprayed and microwave fused CoMoCrSi/CoMoCrSi-Cr3C2 coatings, 2019, Materials Research Express, 6, 2, 10.1088/2053-1591/aaebd9
118) Ramesh Babu N.; Ramesh M.R.; Kiran Aithal S.,Influence of vibrations during directional solidification on microstructure, hardness and strength of Al-Si-graphite FG composite, 2019, Journal of Mechanical Engineering Research and Developments, 42, 3,84,86, 10.26480/jmerd.03.2019.84.86
119) Medabalimi S.R.; Ramesh M.R.; Kadoli R., High-temperature wear and frictional behavior of partially oxidized Al with NiCr composite coating, 2019, Materials Research Express, 6, 12, 10.1088/2053-1591/ab5c34
120) Varghese V.; Ramesh M.R.; Chakradhar D., Influence of deep cryogenic treatment on performance of cemented carbide (WC-Co) inserts during dry end milling of maraging steel, 2019, Journal of Manufacturing Processes, 37, 242-250, 10.1016/j.jmapro.2018.11.030
121) Kottuparambil R.R.; Bontha S.; Rangarasaiah R.M.; Arya S.B.; Jana A.; Das M.; Balla V.K.; Amrithalingam S.; Prabhu T.R., Effect of zinc and rare-earth element addition on mechanical, corrosion, and biological properties of magnesium, 2018, Journal of Materials Research,33, 20, 3466-3478, 10.1557/jmr.2018.311
122) Prasanna N.D.; Siddaraju C.; Shetty G.; Ramesh M.R.; Reddy M., Studies on the role of HVOF coatings to combat erosion in turbine alloys, 2018, Materials Today: Proceedings, 5, 1, 3130-3136, 10.1016/j.matpr.2018.01.119
123) Mathapati M.; Ramesh M.R.; Doddamani M., Cyclic oxidation behavior of plasma sprayed NiCrAlY/WC-Co/cenosphere coating, 2018, AIP Conference Proceedings, 1943, 10.1063/1.5029647
124) Varghese V.; Chakradhar D.; Ramesh M.R., Micro-mechanical characterization and wear performance of TiAlN/NbN PVD coated carbide inserts during End milling of AISI 304 Austenitic Stainless Steel, 2018, Materials Today: Proceedings, 5, 5, 12855-12862, 10.1016/j.matpr.2018.02.270
125) Soni H.; Narendranath S.; Ramesh M.R., Effect of machining process parameters on productivity rate and surface roughness of machined TiNiCo alloy, 2018, Materials Today: Proceedings, 5, 9, 19166-19171, 10.1016/j.matpr.2018.06.271
126) Badiger P.V.; Desai V.; Ramesh M.R.,Performance of Ti-multilayer coated tool during machining of MDN431 alloyed steel, 2018, AIP Conference Proceedings, 1943, 10.1063/1.5029640
127) Reddy M.S.G.; Ramesh M.R.; Rao N.T.; Jegadeeswaran N., Charactersation & hot corrosion studies on plasma sprayed (WC-CO) / (CR3C2-NICR) Coating on titanium & special steel alloys, 2018, International Journal of Mechanical Engineering and Technology,9,5,227,237
128) Varghese V.; Ramesh M.R.; Chakradhar D., Experimental investigation and optimization of machining parameters for sustainable machining, 2018, Materials and Manufacturing Processes, 33, 16, 1782- 1792, 10.1080/10426914.2018.1476760
129) Badiger P.V.; Desai V.; Ramesh M.R., Performance of DLC coated tool during machining of MDN431 alloyed steel, 2018, Materials Today: Proceedings, 5, 9, 17360-17370, 10.1016/j.matpr.2018.04.149
130) Nithin H.S.; Vijay D.; Ramesh M.R., Cyclic Oxidation and Hot Corrosion Behavior of Plasma-Sprayed CoCrAlY + WC-Co Coating on Turbine Alloys, 2018, Journal of Failure Analysis and Prevention, 18, 5, 1133-1142, 10.1007/s11668-018-0499-0
131) Doddamani M.; Mathapati M.; Ramesh M.R., Plasma sprayed Cr3C2-NiCr/fly ash cenosphere coating: Cyclic oxidation behavior at elevated temperature, 2018, Materials Research Express, 5, 12, 10.1088/2053-1591/aae1d8
132) Manjunath G.K.; Udaya Bhat K.; Preetham Kumar G.V.; Ramesh M.R.,Microstructure and Wear Performance of ECAP Processed Cast Al–Zn–Mg Alloys,2018, Transactions of the Indian Institute of Metals, 71, 8, 1919-1931, 10.1007/s12666-018-1328-6
133) Badiger P.V.; Desai V.; Ramesh M.R.; Raveendra K., Optimization of machining parameters in turning process of mdn431 using ti-multilayer coated tool, 2018, International Journal of Modern Manufacturing Technologies,10, 1, 7, 12
134) Veeresh Nayak C.; Ramesh M.; Desai V.; Kumar Samanta S., Fabrication of stainless steel based composite by metal injection moulding, 2018,Materials Today: Proceedings, 5,2,6805-6814 10.1016/j.matpr.2017.11.340
135) Prakrathi S.; Matin M.; Kiran P.; Manne B.; Ramesh M.R. Crystallisation kinetics study in stabilisation treatment of sol-gel derived 45S5 bioglass, 2018, AIP Conference Proceedings, 1943, 10.1063/1.5029667
136) Prasad C.D.; Joladarashi S.; Ramesh M.R.; Srinath M.S.; Channabasappa B.H., Influence of microwave hybrid heating on the sliding wear behaviour of HVOF sprayed CoMoCrSi coating, 2018, Materials Research Express, 5, 8, 10.1088/2053-1591/aad44e
137) Prasad C.D.; Joladarashi S.; Ramesh M.R.; Sarkar A.,High temperature gradient cobalt based clad developed using microwave hybrid heating,2018, AIP Conference Proceedings,1943, 10.1063/1.5029687
138) Rakesh K.R.; Bontha S.; Ramesh M.R.; Arya S.B.; Das M.; Balla V.K.; Srinivasan A., Laser surface modification of Mg-Zn-Gd alloy: Microstructural, wettability and in vitro degradation aspects, 2018, Materials Research Express, 5, 12,10.1088/2053-1591/aadec6
139) Gonsalves T.H.; Kumar G.C.M.; Ramesh M.R., Parametric study of laminated composite material shaft of high speed rotor-bearing system, 2018, AIP Conference Proceedings,1943, 10.1063/1.5029593
140) Mathapati M.; Doddamani M.; Ramesh M.R., High-Temperature Erosive Behavior of Plasma SprayedCr3C2-NiCr/Cenosphere Coating, 2018, Journal of Materials Engineering and Performance,27, 4, 1592-1600 10.1007/s11665-018-3226-9
141) Nithin H.S.; Desai V.; Ramesh M.R., Hot Corrosion Behaviour of Refractory and Rare Earth Oxide Reinforced CoCrAlY APS Coatings at 700 °C, 2018, Transactions of the Indian Institute of Metals, 71, 10, 2403- 2413 10.1007/s12666-018-1371-3
142) Ramesh Babu N.; Ramesh M.; Kiran Aithal S.; Kotresh K., Effect of Lateral Vibrations during Directional solidification on Mechanical Properties of Al-18%wt Si Alloys, 2018, Materials Today: Proceedings, 5, 2, 6954-6962, 10.1016/j.matpr.2017.11.358
143) Reddy N.C.; Ajay Kumar B.S.; Ramesh M.R.; Koppad P.G., Microstructure and Adhesion Strength of Ni3Ti Coating Prepared by Mechanical Alloying and HVOF, 2018, Physics of Metals and Metallography, 119, 5, 462-468, 10.1134/S0031918X18050113
144) Reddy N.C.; Kumar B.S.A.; Reddappa H.N.; Ramesh M.R.; Koppad P.G.; Kord S., HVOF sprayed Ni3Ti and Ni3Ti+(Cr3C2+20NiCr) coatings: Microstructure, microhardness and oxidation behaviour, 2018, Journal of Alloys and Compounds, 736, 236-245,10.1016/j.jallcom.2017.11.131
145) Veeresh Nayak C.; Ramesh M.R.; Desai V.; Samanta S.K., Evaluation of mechanical properties for nickel based steel produced by metal injection moulding and sintered through conventional and microwave method, 2018, Chemical Engineering Transactions, 66, 799-804, 10.3303/CET1866134
146) Nithin H.S.; Desai V.; Ramesh M.R., Elevated temperature solid particle erosion behaviour of carbide reinforced CoCrAlY composite coatings, 2018, Materials Research Express, 5, 6, 10.1088/2053-1591/aac998
147) Banka V.K.; Ramesh M.R., Thermal Analysis of a Plasma Sprayed Ceramic Coated Diesel Engine Piston, 2018, Transactions of the Indian Institute of Metals, 71,2,319-326, 10.1007/s12666-017-1184-9
148) Doddamani M.; Mathapati M.; Ramesh M.R., Microstructure and tribological behavior of plasma sprayed NiCrAlY/WC-Co/cenosphere/solid lubricants composite coatings, 2018, Surface and Coatings Technology, 354, 92-100, 10.1016/j.surfcoat.2018.09.018
149) Soni H.; Narendranath N.S.; Ramesh M.R., Experimental Investigation on Effects of Wire Electro Discharge Machining of Ti50Ni45Co5 Shape Memory Alloys, 2018, Silicon, 10, 6, 2483-2490,10.1007/s12633-018-9780-9
150) Anne G.; Ramesh M.R.; Nayaka H.S.; Arya S.B., Microstructure, mechanical and corrosion properties of accumulative roll bonded Mg-2%Zn/anodized Al-7075 composite, 2018, Materials Today: Proceedings, 5, 2, 6868-6877, 10.1016/j.matpr.2017.11.348
151) Mathapati M.; Ramesh M.R.; Doddamani M., High temperature erosion behavior of plasma sprayed NiCrAlY/WC-Co/cenosphere coating, 2017, Surface and Coatings Technology,325,98,106, 10.1016/j.surfcoat.2017.06.033
152) Manne B.; Bontha S.; Ramesh M.R.; Krishna M.; Balla V.K., Solid state amorphization of Mg-Zn-Ca system via mechanical alloying and characterization , 2017, Advanced Powder Technology, 28, 223-229, 10.1016/j.apt.2016.09.032
153) Eswaran M.; Athul S.; Niraj P.; Reddy G.R.; Ramesh M.R., Tuned liquid dampers for multi-storey structure: numerical simulation using a partitioned FSI algorithm and experimental validation, 2017, Sadhana-Academy Proceedings in Engineering Sciences, 42, 4, 449-465, 10.1007/s12046-017-0614-z
154) Soni H.; Narendranath S.; Ramesh M.R., ANN and RSM modeling methods for predicting material removal rate and surface roughness during WEDM of Ti50Ni40Co10 shape memory alloy, 2017, Advances in Modelling and Analysis A, 54, 3, 435-443
155) Nithin H.S.; Desai V.; Ramesh M.R., Elevated Temperature Solid Particle Erosion Performance of Plasma-Sprayed Co-based Composite Coatings with Additions of Al2O3 and CeO2, 2017, Journal of Materials Engineering and Performance, 26, 11, 5251-5261, 10.1007/s11665-017-2973-3
156) Badiger P.V.; Desai V.; Ramesh M.R., Development and Characterization of Ti/TiC/TiN Coatings by Cathodic Arc Evaporation Technique, 2017, Transactions of the Indian Institute of Metals, 70, 9, 2459-2464, 10.1007/s12666-017-1107-9
157) Soni H.; Sannayellappa N.; Rangarasaiah R.M., An experimental study of influence of wire electro discharge machining parameters on surface integrity of TiNiCo shape memory alloy, 2017, Journal of Materials Research, 32, 16, 3100- 3108, 10.1557/jmr.2017.137
158) Nithin H.S.; Desai V.; Ramesh M.R., An investigation on high temperature erosion behaviour of plasma sprayed CoCrALY/Al2O3/YSZ on fe and ni based alloys, 2017, Pertanika, Journal of Science and Technology, 25, 2, 397, 406
159) Somasundaram B.; Jegadeeswaran N.; Madhu G.; Ramesh M.R., Erosion behaviour of HVOF sprayed (CR3C2-35%NICR) +5%Si coatings, 2017, International Journal of Mechanical Engineering and Technology, 8, 8, 1124-1134
160) Anne G.; Ramesh M.R.; Shivananda Nayaka H.; Arya S.B.; Sahu S., Microstructure Evolution and Mechanical and Corrosion Behavior of Accumulative Roll Bonded Mg-2%Zn/Al-7075 Multilayered Composite, 2017, Journal of Materials Engineering and Performance, 26, 4, 1726-1734, 10.1007/s11665-017-2576-z
161) Anne G.; Ramesh M.R.; Shivananda Nayaka H.; Arya S.B.; Sahu S., Development and characteristics of accumulative roll bonded Mg-Zn/Ce/Al hybrid composite, 2017, Journal of Alloys and Compounds, 724, 146-154, 10.1016/j.jallcom.2017.07.026
162) Anne G.; Ramesh M.R.; Nayaka H.S.; Arya S.B.; Sahu S., Development and properties evaluation of Mg-6% Zn/Al multilayered composites processed by accumulative roll bonding, 2017, Journal of Materials Research, 32, 12, 2249,-2257, 10.1557/jmr.2017.176
163) Bharath Kumar B.R.; Doddamani M.; Zeltmann S.E.; Gupta N.; Ramesh M.R.; Ramakrishna S., Processing of cenosphere/HDPE syntactic foams using an industrial scale polymer injection molding machine, 2016, Materials and Design 92, 414-423,10.1016/j.matdes.2015.12.052
164) Somasundaram B.; Kadoli R.; Ramesh M.R.; Ramesh C.S., High temperature corrosion behaviour of HVOF sprayed WC-CrC-Ni coatings, 2016, International Journal of Surface Science and Engineering, 10, 4, 400,-413, 10.1504/IJSURFSE.2016.077542
165) Somasundaram B.; Kadoli R.; Ramesh M.R., Hot Corrosion Behaviour of HVOF Sprayed (Cr3C2–35 % NiCr) + 5 % Si Coatings in the Presence of Na2SO4–60 % V2O5 at 700 °C, 2015, Transactions of the Indian Institute of Metals, 68, 2, 257,-268, 10.1007/s12666-014-0453-0
166) Jegadeeswaran N.; Udaya Bhat K.; Ramesh M.R., Improving Hot Corrosion Resistance of Cobalt Based Superalloy (Superco-605) Using HVOF Sprayed Oxide Alloy Powder Coating, 2015, Transactions of the Indian Institute of Metals, 68, 309-316, 10.1007/s12666-015-0605-x
167) Jegadeeswaran N.; Ramesh M.R.; Prakrathi S.; Bhat K.U., Hot corrosion behaviour of HVOF sprayed stellite-6 coatings on gas turbine alloys, 2014, Transactions of the Indian Institute of Metals, 67, 1, 87-93, 10.1007/s12666-013-0317-z
168) Somasundaram B.; Kadoli R.; Ramesh M.R., Evaluation of cyclic oxidation and hot corrosion behavior of HVOF-sprayed WC-Co/NiCrAlY coating, 2014, Journal of Thermal Spray Technology, 23, 6, 1000- 1008, 10.1007/s11666-014-0112-3
169) Jegadeeswaran N.; Ramesh M.R.; Bhat K.U., Combating corrosion degradation of turbine materials using HVOF sprayed 25% (Cr3C2-25(Ni20Cr)) + NiCrAlY coating, 2013, International Journal of Corrosion, 2013, 10.1155/2013/824659
170) Jegadeeswaran N.; Ramesh M.R.; Bhat K.U., Hot corrosion studies on as-received and HVOF sprayed Al2O 3+CoCrAlTaY on Ti-31 alloy in salt environment, 2013, Procedia Engineering, 64, 1013-1019, 10.1016/j.proeng.2013.09.178
171) Ramesh M.R.; Prakash S.; Nath S.K.; Sapra P.K.; Krishnamurthy N., Evaluation of thermocyclic oxidation behavior of HVOF-sprayed NiCrFeSiB coatings on boiler tube steels, 2011, Journal of Thermal Spray Technology, 20, 5, 992-1000, 10.1007/s11666-010-9605-x
172) Ramesh M.R.; Prakash S.; Nath S.K.; Sapra P.K.; Krishnamurthy N., Erratum: Evaluation of thermocyclic oxidation behavior of HVOF-sprayed NiCrFeSiB coatings on boiler tube steels (Journal of Thermal Spray Technology DOI: 10.1007/s11666-010-9605-x), 2011, Journal of Thermal Spray Technology, 20, 5, 1139, 10.1007/s11666-011-9617-1
173) Ramesh M.R.; Prakash S.; Nath S.K.; Sapra P.K.; Venkataraman B., Solid particle erosion of HVOF sprayed WC-Co/NiCrFeSiB coatings, 2010, Wear,269,03-Apr, 197-205, 10.1016/j.wear.2010.03.019
174) Sapra P.K.; Singh S.; Prakash S.; Ramesh M.R., Elevated temperature solid particle erosion performance of Al 2O3-3 wt% tio2composite coatings, 2010, International Journal of Surface Science and Engineering, 4, 04-Jun, 360-376, 10.1504/IJSURFSE.2010.035141
175) Krishnamurthy N.; Murali M.S.; Mukunda P.G.; Ramesh M.R., Characterization and wear behavior of plasma-sprayed Al2O 3 and ZrO25CaO coatings on cast iron substrate, 2010, Journal of Materials Science, 45, 3, 850-858, 10.1007/s10853-009-4009-3

Book Chapter

1) Mahantayya Mathapati, M.R. Ramesh, Mrityunjay Doddamani,13 - Lightweight and sustainable materials for coating applications, Editor(s): Sanjay Mavinkere Rangappa, Sunita M. Doddamani, Suchart Siengchin, Mrityunjay Doddamani, Lightweight and Sustainable Composite Materials, Woodhead Publishing, 2023, Pages 241-258, ISBN 9780323951890, https://doi.org/10.1016/B978-0-323-95189-0.00011-1.
2) Suresh, G., Ramesh, M.R., Srinath, M.S. (2023). Surface Engineered Titanium Alloys for Biomedical, Automotive, and Aerospace Applications. In: Vignesh, R.V., Padmanaban, R., Govindaraju, M. (eds) Advances in Processing of Lightweight Metal Alloys and Composites. Materials Horizons: From Nature to Nanomaterials. Springer, Singapore. https://doi.org/10.1007/978-981-19-7146-4_5
3) Gudala Suresh, M.R. Ramesh, Ajit M. Hebbale, M.S. Srinath, Clad Developments Through Microwave Hybrid Heating Technique, Advances in Microwave Processing for Engineering Materials, 1st Edition, 2022, CRC Press, Pages22, eBook ISB:N9781003248743
4) Praveennath G Koppad, MR Ramesh, S Joladarashi, ST Aruna, Nagaraja C Reddy, C Siddaraju, Gaseous Phase Processing Techniques for Functionally Graded Materials, book titled Functionally Graded Materials (FGMs): Fabrication, Properties, Applications, and Advancements, CRC Press- Taylor and Francis Group. Sep 2021, Page 49-76, ISBN 9781000439342.
5) C. Durga Prasad, Akhil Jerri, M. R. Ramesh, Evaluation of Microstructural and Dry Sliding Wear Resistance of Iron-Based SiC-Reinforced Composite Coating by HVOF Process Wear Resistance of Fe-Based Coatings, Book-Thermal Spray Coatings, 1st Edition, First Published 2021, Imprint CRC Press, Pages13, eBook ISBN9781003213185
6) Durga Prasad C, Mahantayya Matapathi, Ramesh M R, and Sharnappa Joladarashi, "Investigation of Microstructural and Tribological Behavior of Metco 41C+WC-12Co Composite Coating Sprayed by HVOF Process" book titled “Thermal Spray Coatings”, CRC press- Taylor and Francis Group. ISBN 9781032081489, November 29, 2021, 392 Pages.
7) Veeresh Nayak C., Manjunath Patel G.C., Ramesh M.R., Desai V., Samanta S.K. (2020) Analysis and Optimization of Metal Injection Moulding Process. In: Gupta K. (eds) Materials Forming, Machining and Post Processing. Materials Forming, Machining and Tribology. Springer, Cham, pp 41-74
8) Gajanan Anne, S. Ramesh, Goutham Kumar, Sandeep Sahu, M. R. Ramesh, H. Shivananda Nayaka, and Shashibhushan Arya, Development, Characterization, Mechanical and Corrosion Behaviour Investigation of Multi-direction Forged Mg–Zn Alloy. In: Joshi V., Jordon J., Orlov D., Neelameggham N. (eds) Magnesium Technology 2019. The Minerals, Metals & Materials Series. Springer, Cham, pp 339-343
9) Hargovind Soni, S. Narendranath, M. R. Ramesh, Dumitru Nedelcu, Madindwa Mashinim, Anil Kumar, Development of Ti50Ni50−XCox (X = 1 and 5 at. %) Shape Memory Alloy and Investigation of Input Process Parameters of Wire Spark Discharge Machining, Intelligent Manufacturing. Materials Forming, Machining and Tribology, Springer International Publishing, Switzerland AG, Hardcover ISBN 978-3-030-50311-6, DOI 10.1007/978-3-030-50312-3, 2021, pp 77-97.
10) Ramesh M.R., Dasarath SM, Prashatha K, edited proceedings of 5th International Conference on Advanced Research in Mechanical, Materials and Manufacturing Engineering-2021, Materials today Proceedings, Volume 54, Part 2, Pages 131-556 (2022)