Narendranath S

Designation: 

Professor (On Deputation as Director, NERIST, Arunachal Pradesh)

Date of Joining at NITK: 

Thursday, May 11, 1995

Professional Experience: 

DEPT OF MECH
1. LECTURER KREC, SURATHKAL
2. SENIOR LECTURER KREC, SURATHKAL
3. SELECTION GRADE LECTURER, NITK, SURATHKAL
4. ASSISTANT PROFESSOR, NITK, SURATHKAL
5. ASSOCIATE PROFESSOR, NITK, SURATHKAL
6. PROFESSOR, NITK, SURATHKAL
7. PROF-IN-CHARGE,
HOSTEL AFFAIRS, NITK.
(01.04.2014-08.04.2016)

Contact Details

E-mail: 

bayalu@ nitk.ac.in
snnath88@yahoo.co.in
narenbayalu@gmail.com

Telephone: 

+91-824-2474000 Extn. 3660

Fax: 

+91-824-2474033

Mobile: 

09448793833

Google Scholar: 

https://scholar.google.co.in/citations?hl=en&user=PEP6g9IAAAAJ

Others: 

https://www.researchgate.net/profile/Narendranath_S
Academic Background

1. BE (Mechanical), Mysore University, Govt. BDT College of Engg. DAVANAGERE, KARNATAKA, INDIA
2. MTech (PEST), Kuvempu Univeristy, University BDT College of Engg. DAVANAGERE, KARNATAKA, INDIA
3. PhD (Materials), IIT Kharagpur. WEST BENGAL, INDIA

Areas of Interest
  • Advanced Manufacturing and Technology
  • Non Traditional Machining of advanced materials,
  • Severe Plastic Deformation,
  • Shape Memory Alloy,
  • Welding technology
Significant Projects

1. “Investigation of machining characteristics of TiNi based Shape Memory alloy using Wire-EDM” SB/S3/MMER/0067/2013, DST Sponsored, NEW DELHI
2. "Study of corrosion behavior of wrought Mg Alloys processed by severe plastic deformation for naval applications" NRB-366/Mat/15-16, NRB Sponsored, NEW DELHI

Supervision of Ph.D

Completed : 5
Ongoing : 10

Sl. No PHD THESIS TITLE YEAR
1 EVALUATION OF WEDM PERFORMANCE CHARACTERISTICS OF INCONEL 706 FOR TURBINE DISC PROFILE APPLICATION 2016
2 EFFECT OF AGEING ON THE MICROSTRUCTURE AND MECHANICAL PROPERTIES OF Al-Si ALLOYS WITH COPPER ADDITIONS 2016
3 FAULT DIAGNOSIS OF SINGLE POINT CUTTING TOOL THROUGH ONLINE AND OFFLINE MONITORING TECHNIQUES 2016
4 EFFECT OF EQUAL CHANNEL ANGULAR PRESSING ON MICROSTRUCTURE AND MECHANICAL PROPERTIES OF WROUGHT AZ
MAGNESIUM ALLOYS 2015
5 ANALYSIS AND OPTIMIZATION OF WIRE ELECTRO DISCHARGE MACHINING OF Ti50Ni50-xCux SHAPE MEMORY ALLOYS 2014
6 SOME STUDIES ON PROCESS PARAMETERS IN CENTRIFUGAL CASTING 2014
7 DEVELOPMENT AND CHARACTERIZATION OF FUNCTIONALLY GRADED Al-Si ALLOY SYSTEM AND Al-Si/Al-SiCp COMPOSITES USING
CENTRIFUGE CASTING 2013

Significant Publications

International Journals
1. S. Narendranath, S. Basavarajappa, K. V. Arun, and M. Yadav S, “Effect of Applied Load on Dry Sliding Wear Property of Aged TiNiCu Alloy,” Journal of Minerals & Materials Characterization & Engineering, vol. 9,
no. 9, pp. 811-817, 2010.
2. S. Narendranath, Vijay Desai, S. Basavarajappa, K. V. Arun, and M. Yadav S, “Hot Rolling and Ageing Effect on the Pseudoelasticity Behaviour of Ti-Rich TiNi Shape Memory Alloy,” Journal of Minerals & Materials Characterization & Engineering, vol. 9, no. 4, pp. 343-351, 2010.
3. S. Narendranath, M. Manjaiah, S. Basavarajappa, V. N. Gaitonde, “Experimental investigations on performance characteristics in Wire EDM of Ti50Ni42.4Cu7.6 shape memory alloy” Proceedings of the Institution of Mechanical Engineers, Part B, Journal of Engineering Manufacture. 0954405413478771, first published on June 10, 2013 as doi:10.1177/0954405413478771
4. M Manjaiah, S Narendranath, S Basavarajappa, “A Review On Machining Of Titanium Based Alloys Using EDM and WEDM”, Reviews on Advanced materials Science Journal, (accepted on 13 June 2013)
5. M. Manjaiah, S. Narendranath, S. Basavarajappa, “Nonconventional Machining of Shape Memory Alloys: A Review”, Materials research (under review)
6. M. Manjaiah, S. Narendranath, S Basavarajappa, “Wire Electro Discharge Machining Performance of Ti50Ni45Cu5 Shape Memory Alloy”, Transactions of Nonferrous Metals Society of China (under review)
7. Sriram Mukunda, Dr. Narendra Nath. S, Dr. Mervin A. Herbert, “Some Effects Of Alloying And Heat Treatment On Properties Of NiTiCu” International Journal of Materials Research (under review).
8. Kiran Aithal, V. Desai, S. Narendranath, and P. G. Mukunda, “Characterization of Al-Si Functionally graded Materials Using Centrifugal Casting Method”, International Review of Mechanical Engineering, Vol.3 No.5, pp.632-639, 2009.
9. Madhusudhan, S. Narendranath, G.C.M. Kumar and P.G. Mukunda, “Experimental Study on Rate of Solidification of Centrifugal Casting,” International Journal of Mechanical and Materials Engineering (IJMME), vol. 5, no. 1, pp. 101-105, 2010.
10.Madhusudhan, Narendranath S, Mohankumar G C, Mukunda P G, “Effect Of Mould Wall Thickness on Rate of Solidification of Centrifugal Casting”, International Journal of Engineering Science and Technology, Vol. 2(10), 2010, 6090-6094.
11.S. Manjunath Yadav, K. V. Arun, S. Basavarajappa, Narendranath S, and Santosh Kumar, “Collapse Mechanism of Foam Cored Sandwich Structures under Compressive Load” Polymer Plastics Technology and Engineering, Vol. 50, no.13, pp. 1351-1356, 2011.
12.Kiran Aithal, Narendranath S, V. Desai, and P. G. Mukunda, “Effect of L / D Ratio on Al-Si Functionally Graded Material cast through Centrifuge Technique,” Advanced Materials Research, vol. 213, pp. 281-285, 2011.
13.Kiran Aithal, V. Desai, Narendranath S and P. G. Mukunda, “Evolution Of Microstructure and Hardness of Al-Si Functionally Graded Material Cast Through Centrifuge Technique Using Hypereutectic and Eutectic Al-Si,”International Journal of Mechanical and Materials Engineering (IJMME), vol. 6, no. 2, pp. 275-279, 2011.
14.S. Basavarajappa, S. Manjunath Yadav, Santosh Kumar, K. V. Arun, and Narendranath S. “Abrasive Wear Behavior of Granite-Filled Glass-Epoxy Composites by SiC Particles Using Statistical Analysis”, Polymer-Plastics Technology and Engineering, 50: 1–9, 2011.
15.Madhusudhan, Narendranath S, G C Mohan Kumar, “ Experimental Study on Cooling Rate of Centrifugal Casting Based on Grain Size” International Journal of Scientific & Engineering Research, Volume 3, Issue 1, January-2012.
16.Madhusudhan, Narendranaath S Mohankumar G C, “Effect of Mould wall Temperature on rate of solidification of centrifugal casting”, International Journal of Mechanic Systems Engineering (IJMSE), June 2012.
17.Madhusudhan, Narendranath S, G C Mohan Kumar “Properties of Centrifugal casting at different rotational speeds of the die” International Journal of Emerging Technology and Advanced Engineering (ISSN 2250–2459, ISO 9001:2008 Certified Journal, Volume 3, Issue 1, January 2013)
18.Muralidhar A, Narendranath S, Shivananda Nayaka H, “A Review on wrought magnesium alloys processed by equal channel angular pressing”, International Journal of Materials and Product Technology (under review)
National Journals
1. Sriram Mukunda, Narendranath S and P. G. Mukunda, “Effect of copper content and Low temperature ageing on Nitinols.” Indian Foundray Journal, vol 57, P.No. 8, 2011.
2. Kiran Aithal S., Vijay Desai, Narendranath S. and P. G. Mukunda, “Microstructure, Hardness and Wear Characterisation of Al-Si FGMs”. Indian Foundray Journal, p 39-48. Vol 58, No. 5, 2012.

Achievements

1. Joint organising secretary, International Conference on Frontiers in Mechanical Engineering- FIME- 2010, .
2. Organizing Secretary, International Conference on Advances in Manufacturing and Materials Engineering- ICAMME-2014,(Publised in Procedia of materials science
avilable in online in science direct (www.elsevier.com/locate/procedia))
3. Awarded 3rd Rank in "Science Direct Top 25 List of Most Downloaded Articles" for Transactions of Non-ferrous Metals Society of China - January to December,
2014 Full Year.
4. Consultancy Project on Machinability study of 12L14/EN 1A free cutting steel for MUKUND Ltd. (COMPLETED)

Remarks

Detailed CV: 

PDF icon Dr. Narendra Nath S - Biodata.pdf
 

Contact us

Dr. S M Murigendrappa

Professor and Head,

Department of Mechanical Engineering,

National Institute of Technology Karnataka (NITK),

Surathkal

P. O. Srinivasnagar, Mangaluru - 575 025 Karnataka, India.

  • Phone No. (O): +91-0824-2473049

Connect with us

We're on Social Networks. Follow us & get in touch.